VOOPOO DRAG H40 Pro Kit

$42.75

📍 Available for In-Store Purchase Only

Federal regulations prohibit shipping. Visit our Knoxville locations to purchase.

Description

The VOOPOO DRAG H40 Pro Kit is a compact 40W pod mod built around a 2450mAh internal battery, 5mL PnP X cartridge, 0.72-inch TFT display, 5V/2A USB-C fast charging, and the VOOPOO PnP X coil platform.

It is designed to cover both DTL and MTL vaping depending on the cartridge and coil being used, giving the H40 Pro considerably more flexibility than its compact size suggests. Apparently “small device” no longer means “three settings and hope for the best.”

Product Specifications

  • Brand: VOOPOO
  • Model: DRAG H40 Pro
  • Product Type: Pod Mod Kit
  • Output Power: 5–40W
  • Output Voltage: 3.2–4.2V
  • Resistance Range: 0.3–3.0Ω
  • Battery: Built-in 2450mAh
  • Charging: USB Type-C, 5V/2A
  • Display: 0.72-inch TFT
  • Activation: Button activated
  • Body Material: Zinc Alloy + Leather
  • Coil Platform: VOOPOO PnP X
  • Standard Pod Capacity: 5mL
  • Filling: Side fill
  • Vaping Styles: MTL, RDL, and DTL depending on cartridge and coil

PnP X Coil Compatibility

The DRAG H40 Pro uses the VOOPOO PnP X platform.

Compatible replaceable PnP X coils include:

  • PnP X 0.15Ω — DTL — 60–80W
  • PnP X 0.2Ω — DTL — 40–60W
  • PnP X 0.3Ω — DTL / RDL — 32–40W
  • PnP X 0.45Ω — RDL — 25–32W
  • PnP X 0.6Ω — MTL / RDL — 18–23W
  • PnP X 0.8Ω — MTL — 12–16W
  • PnP X 1.0Ω — MTL — 10–13W

Because the DRAG H40 Pro has a 40W maximum output, the 0.3Ω, 0.45Ω, 0.6Ω, 0.8Ω, and 1.0Ω options are the most naturally matched to the device’s available power range.

Cartridge Compatibility

VOOPOO confirms the DRAG H40 Pro works with the broader PnP X cartridge platform, including compatible:

  • PnP X DTL Cartridge
  • PnP X MTL Cartridge
  • PnP X integrated-coil cartridges

The device can therefore be configured for a tighter MTL setup or a more open RDL / DTL draw without replacing the entire device.

Battery and Charging

The H40 Pro uses a built-in 2450mAh battery, a substantial increase over the original DRAG H40.

Charging is rated at 5V/2A through USB-C, and VOOPOO also confirms support for pass-through use while charging.

That gives you considerably more battery than the original H40 without turning the device into something that needs its own carrying case.

Display and Controls

The 0.72-inch TFT display shows key device information in a compact format.

Controls include:

  • Fire button
  • Power adjustment buttons
  • Dual-button lock / unlock function

The lock feature helps prevent accidental activation or unwanted wattage changes while carrying the device.

Available Colors

  • Modern Red
  • Lake Blue
  • Gray Metal
  • Glow Pink
  • Spray Black
  • Cocoa Red
  • Moss Green
  • Snow Blue

Not every manufacturer color is necessarily stocked at L7. If you are looking for a specific finish, ask us about availability.

Safety Protections

VOOPOO includes six electronic protections:

  • Overtime Protection
  • Overtemperature Protection
  • Overcharge Protection
  • Low Battery Protection
  • Output Over-Current Protection
  • Short-Circuit Protection

Package Contents

  • 1 VOOPOO DRAG H40 Pro Device
  • 1 PnP X DTL Cartridge – 5mL
  • 1 PnP X 0.3Ω Coil – Preinstalled
  • 1 PnP X 0.45Ω Coil
  • 1 PnP X Platform Card
  • 1 USB Type-C Cable
  • 1 User Manual

Additional Product Information

The DRAG H40 Pro uses the newer PnP X coil platform, not the original PnP coil family used by the older DRAG H40.

Prime a new replaceable coil before use and allow the wick time to fully saturate after filling.

With 40W of output, a 2450mAh battery, a 5mL cartridge, and PnP X compatibility, this is basically the DRAG H40 after somebody gave it a larger battery and told it to take the job more seriously.

Additional information

Option

Gray Metal, Modern Red

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.